Pasar al contenido principal
  • Socios aprobados
  • Acerca de ELGA
    • Acerca de ELGA
    • Empleo
    • Eventos
  • Soporte
    • Planificación de laboratorio
    • Registrar un producto
    • Register Your Product (USA & Canada Only)
  • Contacto
  • U.S.A.
  • U.K.
  • Deutschland
  • France
  • Italia
  • Brasil
  • 日本
  • 中国
Inicio ELGA LabWater
  • Productos
    • PURELAB
    • CENTRA
    • MEDICA
    • BIOPURE
    • Gama completa de productos ELGA
  • Aplicaciones
    • Análisis microbiológico
    • Bioquímica clínica
    • Cromatografía de gases
    • Cromatografía líquida
    • Cultivos celulares
    • Electroquímica
    • Espectrofotometría
    • Espectrometría de masas
    • Espectroscopia atómica
    • Genética
    • Inmunoquímica
    • Requisitos generales de agua de laboratorio
  • Tecnologías
    • Carbón activado
    • Electrodesionización (EDI)
    • Filtración
    • Intercambio iónico
    • PureSure
    • Ultravioleta
    • Ósmosis inversa
  • Impurezas en el agua
    • Compuestos inorgánicos
    • Compuestos orgánicos
    • Gases disueltos
    • Microorganismos y bacterias
    • Partículas
  • Knowledge
    • Blog
    • Casos prácticos
    • Agua ultrapura
    • Manuales e informes técnicos
  • Productos
    • PURELAB
    • CENTRA
    • MEDICA
      • Hubgrade
      • MEDICA BIOX
    • BIOPURE
    • Gama completa de productos ELGA
      • PURELAB® Classic
  • Aplicaciones
    • Análisis microbiológico
    • Bioquímica clínica
    • Cromatografía de gases
    • Cromatografía líquida
      • Hochleistungsflüssigkeitschromatographie (HPLC)
    • Cultivos celulares
    • Electroquímica
    • Espectrofotometría
    • Espectrometría de masas
    • Espectroscopia atómica
    • Genética
    • Inmunoquímica
    • Requisitos generales de agua de laboratorio
  • Tecnologías
    • Carbón activado
    • Electrodesionización (EDI)
    • Filtración
    • Intercambio iónico
    • PureSure
    • Ultravioleta
    • Ósmosis inversa
  • Impurezas en el agua
    • Compuestos inorgánicos
    • Compuestos orgánicos
    • Gases disueltos
    • Microorganismos y bacterias
    • Partículas
  • Knowledge
    • Blog
      • Analytical Chemistry
      • Clinical & Pharma
      • Cool Science
      • Environment and sustainability
      • Life in the lab
      • Purelab product design
      • Science of the future
      • Water Purity
      • Water in the lab
    • Casos prácticos
      • Abbott Diagnostics elige sistemas ELGA MEDICA en el sur de Asia
      • Beam Me Up, Scotty: PURELAB® Option Q Delivers Essential Ultra Pure Water
      • Argenta chooses DKSH New Zealand to deliver Ultrapure water in Animal Pharma
      • Clean Water for a Clean Future
      • LS Scientific & ELGA deliver UltraPure water to the NAFDAC Laboratory
      • Lifebrain Group chooses ELGA as water partner for new modern 24/7 PCR-COVID-19 laboratory in Vienna, Austria.
      • Critital Tests Benefit from PURELAB® Option Reliable Pure Water
      • DASA: la mayor empresa de diagnóstico médico de Brasil
      • ELGA ayuda a los laboratorios de inmunoserología a maximizar el tiempo de actividad
      • Fondazione Telethon Continues to Choose ELGA Labwater as a Trusted Partner
      • La importancia del agua ultrapura de tipo 1+ para el desarrollo de medicamentos genéricos
      • Seleccionan MEDICA® Pro para los analizadores Siemens ADVIA® del City General Hospital
      • Optimale Wasserqualität für mikrobiologische Forschung und Lehre
      • PURELAB® Option R Guarantees Pure Water for Leading Microfluidics Technology
      • PURELAB® Pulse Delivers Reliable Water Quality and Quantity for a Wide Range of Applications
      • PURELAB® flex: un sistema de formación ideal para el método de investigación actual
      • Powering Cutting-Edge Gene Research
      • Sichere Reinstwasserversorgung für präzise Produkttests
      • Zentrale Reinstwasser-Aufbereitung für Analyser
      • ELGA LabWater and Beckman Coulter Join Forces
      • Applied New Technologies Department Improves ICP, IC & HPLC Sample Turnaround Times with PURELAB®
      • Descubrir los secretos de la Antártida con ayuda del agua ultrapura
      • Advancing Genetic Technologies
      • Cross Infection Control: Pure and Simple
      • Researching effective new ways to prevent cardiovascular disease at the University of Columbia
    • Agua ultrapura
    • Manuales e informes técnicos
      • Pureza de agua de HPLC
      • HPLC en farmacia
      • Reducción del riesgo clínico
      • Sostenibilidad
  • U.S.A.
  • U.K.
  • Deutschland
  • France
  • Italia
  • Brasil
  • 日本
  • 中国
  • Política de privacidad
  • Términos y condiciones
  • Cumplimiento legal internacional
  • Patentes
  • Aviso legal
  • Inicio
  • A new photothermal device for seawater desalination
Water Purity

A new photothermal device for seawater desalination

18 Jul 2022
- by ELGA Editorial Team

A new photothermal device for seawater desalinationThe number of countries suffering from shortages of fresh drinking water has risen significantly in recent years due to rapid population growth, climate change and the intensification of industries such as agriculture. Since seawater represents about 96.7 % of the total available water on the earth, desalination by seawater reverse osmosis (SWRO) is currently the most economical way to produce potable water. However, SWRO only demonstrates around 50% efficiency, due to technical limitations related to high osmotic pressures and the concentration polarisation phenomenon. This led a team of scientists from the United Arab Emirates (UAE) and Italy to evaluate a plasmonic photothermal membrane distillation tool that could drastically increase the efficacy of seawater desalination.

Membrane distillation (MD) has emerged as a potential alternative or complementary technique to SWRO in recent years. However, conventional MD systems are negatively affected by temperature polarisation, which drastically reduces their performance.

One option for increasing desalination capacity could be photothermal membrane distillation (PMD), a hybrid thermal membrane technology based on the use of microporous hydrophobic membranes. The plasmonic photothermal MD device comprises advanced nanostructured membranes with metallic nanoparticles (NPs) in polymeric matrixes. This novel method is unlimited by osmotic phenomena, and so it can produce desalted water with a high thermal efficiency of over 85 % and a comparatively low energy input. Researchers from the Masdar Institute of Science and Technology in the UAE, and the National Research Council of Italy (ITM-CNR) and the Italian universities of Calabria and Sassari, have studied the effects of NP content on the membrane surface temperature resulting from the polarisation phenomenon, to determine the influence of photothermal plasmonic excitation on MD function.1 

 

Sample preparation and analysis

Deionised water produced by a PURELAB® water purification system from ELGA LabWater was used throughout the investigation. Silver (Ag) NPs were synthesised by chemical reduction with sodium citrate as a metal precursor, and flat-sheet microporous membranes containing Ag NPs were prepared by the nonsolvent-induced phase inversion process. Scanning electron microscopy

and transmission electron microscopy were carried out to establish the influence of the Ag NPs on the surface and cross-sectional morphology of the membranes. To explore the photothermal effects on the membrane, a high-pressure UV mercury lamp was used to irradiate a dedicated dead-end vacuum MD cell while a feed solution was pumped over the membrane. The membrane surface temperature was monitored with a probe during the experiment. A comparative energy analysis between the vacuum MD prototype and a standard reverse osmosis set-up was also performed.

 

Results

The photothermal heat flux was 1.7 times greater for tests with pure water than the latent heat flux associated with the water evaporation through the membrane, and was approximately doubled for a saline solution. The thermal radiation energy of the UV lamp raised the surface temperature by about 2.5 K in membranes without Ag NPs, compared to an increase of 4 K in those containing these metallic nanoparticles.

This study demonstrated that thermoplasmonic effects were promoted by photothermal excitations of Ag NPs incorporated into microporous membranes. This raised the feed temperature at the membrane surface exposed to UV irradiation, and so reversed temperature polarisation, achieving a previously unrecorded MD efficiency. 

 

Future applications

Despite the promising early results, the major challenge facing this new MD equipment, is the scale-up from a micrometre to an industrial scale. Energy consumption is a key factor to consider in scaling up, and the comparative energy analysis shows that this novel thermoplasmonic technique has the potential to reduce energy demands by 25%, significantly boosting the performance of the pre-existing MD system. The ability of PMD to effectively operate at high salt concentration, regardless of osmotic counter pressures, could play a vital role in enhancing water quality and desalting capacity, ultimately improving the sustainability and productivity of the seawater desalination process.

 

Why Choose ELGA LabWater?

The presence of impurities in laboratory water can be a major problem in research experiments, and can seriously compromise results. ELGA LabWater has been a trusted supplier or pure and ultrapure water since 1937. We believe in giving you choice in how you use our water purification solutions, supported by excellent service and support. For more information on our Type I ultra pure water systems, check out our PURELAB Quest, PURELAB Chorus 1 Complete and our PURELAB flex models.

 

References

1 Politano, A et al. 2017. Photothermal Membrane Distillation for Seawater Desalination. Advanced Materials 29:10.1002/adma.201603504.

Quest Download

PURELAB Quest

The only purifier on the market that dispenses all 3 types of science ready water from a compact, economical and easy to use system!

             Click Here To Find Out More

 

  • Enquiry
  • Consigue una cotización
  • Reserve una demo
  • Encuentre un socio aprobado

Enquiry

Please check this to confirm that you have read our Terms of Service and Privacy Policy.

Consigue una cotización

Please check this to confirm that you have read our Terms of Service and Privacy Policy.

Reserve una demo

Please check this to confirm that you have read our Terms of Service and Privacy Policy.

Call us

Can't find what you are looking for?

Support Number
+44 (0)20 3567 7300
United Kingdom Sales
+44 (0)1628 879 704
United States of America Sales
+1 877-315-3542
France Sales
+33 1 40 83 65 00
China Sales
+86 400-616-8882

 

ELGA LabWater US Headquarters

Lane End Business Park
Lane End, High Wycombe
HP14 3BY
Reino Unido
Tel.: +44 (0) 203 567 7300
F: +44 (0) 203 567 7205

Sede central de ELGA LabWater

Lane End Business Park
Lane End, High Wycombe
HP14 3BY
Reino Unido
Tel.: +44 (0) 203 567 7300
F: +44 (0) 203 567 7205

Casos prácticos

  • Abbott Diagnostics
  • Diagnóstico médico de DASA
  • Instituto Médico NeoDIN
  • Fundación del NHS de North Staffordshire
  • Escuela técnica de Olsberg

Recursos

  • Obtenga más información sobre el agua ultrapura
  • Manuales e informes técnicos
  • Tecnologías de purificación
  • Aplicaciones
  • Impurezas en el agua

Blogs

  • Latest Blog
  • Water Purity - Different Types of Pure Water
  • What is Clinical Laboratory Reagent Water (CLSI)?
  • What is Total Organic Carbon (TOC)?
  • Idioma
    • Deutsch
    • English
    • Español
    • Français
    • Italiano
    • Português
    • 日本語
    • 中文
  • Otros sitios de Veolia
    • Veolia
    • Veolia Foundation
    • Veolia Water Technologies

© VWS (UK) Ltd. comercializado como ELGA LabWater.2023-Todos los derechos reservados.
ELGA es la marca mundial de agua de laboratorio de Veolia.

  • Política de privacidad
  • Términos y condiciones
  • Cumplimiento legal internacional
  • Patentes
  • Aviso legal
Elga Veolia
TOP

© 2017 ELGA Veolia