Pasar al contenido principal
Inicio

Dedicated to discovery

  • Acerca de ELGA
    • Acerca de ELGA
    • Empleo
    • Eventos
  • Soporte
    • Planificación de laboratorio
  • Contacto
  • EN
  • DE
  • FR
  • IT
  • PT
  • EN-US
Inicio
  • Productos
    • PURELAB
      • PURELAB® Dispenser
      • PURELAB® Flex
      • PURELAB® Quest
      • PURELAB® Pharma Compliance
      • PURELAB® Chorus 1 Complete
      • PURELAB® Chorus 1
      • PURELAB® Chorus 2
      • PURELAB® Chorus 3
      • Purelab Chorus 2+ (RO/DI/UV) / (RO/EDI/UV)
    • CENTRA
      • CENTRA® R60/120
      • CENTRA® R200
      • CENTRA® RDS
    • MEDICA
      • MEDICA® 150
      • MEDICA® 7/15
      • MEDICA® BIOX 2024
      • MEDICA® Pro-R & Pro-RE
      • MEDICA® R200
      • MEDICA® EDI 15/30
      • MEDICA® Pro-LPS
      • MEDICA® Pro EDI 60/120
      • MEDICA® BIOX
      • Hubgrade
    • BIOPURE
      • BIOPURE® 300/600
    • PURENERGY® 30
    • Gama completa de productos ELGA
  • Aplicaciones
    • Análisis microbiológico
    • Bioquímica clínica
    • Cromatografía de gases
    • Cromatografía líquida
      • High Performance Liquid Chromatography
    • Cultivos celulares
    • Electroquímica
    • Espectrofotometría
    • Espectrometría de masas
    • Espectroscopia atómica
    • Genética
    • High Performance Liquid Chromatography (HPLC)
    • Inmunoquímica
    • Requisitos generales de agua de laboratorio
  • Tecnologías
    • Carbón activado
    • Electrodesionización (EDI)
    • Filtración
    • Intercambio iónico
    • PureSure
    • Ultravioleta
    • Ósmosis inversa
  • Impurezas en el agua
    • Compuestos inorgánicos
    • Compuestos orgánicos
    • Gases disueltos
    • Microorganismos y bacterias
    • Partículas
  • Conocimiento
    • BROSCHÜREN
    • Blog
    • Casos prácticos
    • Agua ultrapura
    • Manuales e informes técnicos
  • Where to buy
  • Contacto
Home
  • Contacto
  • Productos
    • PURELAB
      • PURELAB® Dispenser
      • PURELAB® Flex
      • PURELAB® Quest
      • PURELAB® Pharma Compliance
      • PURELAB® Chorus 1 Complete
      • PURELAB® Chorus 1
      • PURELAB® Chorus 2
      • PURELAB® Chorus 3
      • Purelab Chorus 2+ (RO/DI/UV) / (RO/EDI/UV)
    • CENTRA
      • CENTRA® R60/120
      • CENTRA® R200
      • CENTRA® RDS
    • MEDICA
      • MEDICA® 150
      • MEDICA® 7/15
      • MEDICA® BIOX 2024
      • MEDICA® Pro-R & Pro-RE
      • MEDICA® R200
      • MEDICA® EDI 15/30
      • MEDICA® Pro-LPS
      • MEDICA® Pro EDI 60/120
      • MEDICA® BIOX
      • Hubgrade
    • BIOPURE
      • BIOPURE® 300/600
    • PURENERGY® 30
    • Gama completa de productos ELGA
  • Aplicaciones
    • Análisis microbiológico
    • Bioquímica clínica
    • Cromatografía de gases
    • Cromatografía líquida
      • High Performance Liquid Chromatography
    • Cultivos celulares
    • Electroquímica
    • Espectrofotometría
    • Espectrometría de masas
    • Espectroscopia atómica
    • Genética
    • High Performance Liquid Chromatography (HPLC)
    • Inmunoquímica
    • Requisitos generales de agua de laboratorio
  • Tecnologías
    • Carbón activado
    • Electrodesionización (EDI)
    • Filtración
    • Intercambio iónico
    • PureSure
    • Ultravioleta
    • Ósmosis inversa
  • Impurezas en el agua
    • Compuestos inorgánicos
    • Compuestos orgánicos
    • Gases disueltos
    • Microorganismos y bacterias
    • Partículas
  • Conocimiento
    • BROSCHÜREN
    • Blog
    • Casos prácticos
    • Agua ultrapura
    • Manuales e informes técnicos
  • Where to buy
  • Contacto
  • Acerca de ELGA
    • Acerca de ELGA
    • Empleo
    • Eventos
  • Soporte
    • Planificación de laboratorio
  • Contacto
  • EN
  • DE
  • FR
  • IT
  • PT
  • EN-US
  • Política de privacidad
  • Términos y condiciones
  • Cumplimiento legal internacional
  • Patentes
  • Trademarks
  • Aviso legal
  • The Role of Purified Water in Solid Phase Extraction
Analytical Chemistry
Water Purity

The Role of Purified Water in Solid Phase Extraction

11 Feb 2020
- by Dr Paul Whitehead

Medical researcher holding test tube with blue water liquid

Solid Phase Extraction (SPE) has become established over the past forty years as a versatile and powerful tool for pre-concentration in trace analyses of complex matrices including urine, blood, water, beverages, soil, and animal tissue.

 Recent developments1 and the inclusion of SPE in the EU programme for water analyses2 confirm the on-going role of SPE and I am taking the occasion to review the requirement for purified water in current SPE techniques.

SPE covers a range of sample preparation techniques in which one or more compounds in a liquid mixture are separated from other compounds in the mixture by passing the liquid (known as the mobile phase) through a solid (known as the stationary phase). Separation is due to their different physical or chemical interactions with the solid phase. Usually, the desired analytes of interest are retained on the stationary phase. The portion that passes through the stationary phase is discarded and analytes on the stationary phase are collected by rinsing it with an appropriate eluent. As in HPLC, different stationary phases and operating techniques are used for conventional, reverse phase and ion-exchange SPE and they have different pure water requirements.

Basic SPE Procedures

A typical conventional SPE involves five basic steps. First, the cartridge is equilibrated with a non-polar or slightly polar solvent, which wets the surface and penetrates the bonded phase. Then water, or buffer of the same composition as the sample, is typically washed through the column to wet the silica surface. The sample is then added to the cartridge. As the sample passes through the stationary phase, the polar analytes in the sample will interact and retain on the polar sorbent while the solvent, and other non-polar impurities pass through the cartridge. After the sample is loaded, the cartridge is washed with a non-polar solvent to remove further impurities. Then, the analyte is eluted with a polar solvent or a buffer of the appropriate pH.

Reversed phase SPE separates analytes based on their polarity. The stationary phase of a reversed phase SPE cartridge retain compounds of low polarity due to the hydrophobic effect. The analyte can be eluted by washing the cartridge with a non-polar solvent, which disrupts the interaction of the analyte and the stationary phase.

Ion exchange sorbents separate analytes based on electrostatic interactions between the analyte of interest and the positively or negatively charged groups on the stationary phase. For ion exchange to occur, both the stationary phase and sample must be at a pH where both are charged.

The Roles of Water

Purified water is used in SPE to precondition the cartridges, to rinse the extracted material and as an eluent. The water can be used directly, mixed with organic solvents or as a diluent for buffer solutions. The two cases below show typical examples of the use of purified water in SPE.

Wu et al. (2014)3 measured isotopically labelled nitrous oxide in biogeochemical studies by converting it into an azo dye, which is purified by SPE. 20 ml of pure water was used to dilute the dye, a further 2 ml were used to pre-condition the cartridge before extraction and a further 2 ml to wash the extract to remove ions. Water was also used as part of the final eluant before HPLC-MS analysis.

Milkovska-Stamenova et al. (2015)4 used ion exchange SPE in the analysis of glycation mixtures. The cartridges were equilibrated with 3 x 1 ml of ultrapure water, while 50µL sample was diluted with 1 mL water before loading. Carbohydrates were eluted with 10 mL of water prior to derivatization and GC-EI-MS analysis.

As can be seen from these examples, water is a common requirement in SPE work. The volumes involved are often quite small but they are usually considerably more than the samples. High purity is essential, particularly low TOC. Ultrapure water is the norm. Such water is also often required in the subsequent HPLC or LC-MS analyses. A random selection of recent SPE applications showed that ultrapure waterwas used in methods as diverse as the determination of opioids in human urine5, the study of glycosylation in biomedical research6 and the contamination of food by chemicals used in personal care products7.

 

References

  1. Moonis Ali Khan (2015) “Solid Phase Extraction and its Application in Preconcentration of Trace Environmental Pollutant from Wastewater”. envirotech-online.com October/November
  2. Zoe A. Grosser and Jean-Luc Brousseau (2015) “European Water Solid Phase Extraction Methodology Advances” envirotech-online.com November/December
  3. Dianming Wu, Christopher J. Kampf, Ulrich Pöschl, Robert Oswald, Junfang Cui, Michael Ermel, Chunsheng Hu, Ivonne Trebs and Matthias Sörgel (2014) “Novel Tracer Method to Measure Isotopic Labeled Gas-Phase Nitrous Acid in Biogeochemical Studies”. Environ. Sci. Technol. 48, 8021-7, doi: 10.1021/es501353x
  4. Sanja Milkovska-Stamenova, Rico Schmidt, Andrj Frolov and Claudia Birkemeyer (2015) “GC-MS Method for the Quantitation of Carbohydrate Intermediates in Glycation Systems” J. Agric. Food Chem. 63, 5911-19, doi: 10.1021/jf505757m
  5. Amy L.Patton, Kathryn A. Seely, Sharon Pulla, Nancy J. Rusch, Cindy L. Moran,William E. Fantegrossi, Laura D. Knight, Jeanna M. Marraffa, Paul D. Kennedy, Laura P. James, Gregory W. Endres and Jeffery H. Moran (2014) “Quantitative Measurement of Acetyl Fentanyl and Acetyl Norfentanyl in Human Urine by LC-MS/MS” Anal. Chem. 86, 1760-66, doi: 10.1021/ac4036197
  6. Bas C. Jansen, Karli R. Reiding, Albert Bondt, Agnes L. Hipgrave Ederveen, Magnus Palmblad, David Falck and Manfred Wuhrer (2015) “MassyTools: A High-throughput  Targeted Data Processing Tool for Relative Quantitation and Quality Control Developed for Glycomic and Glycoproteomic MALDI-MS” J. Proteome Res. 14, 5088-98, doi: 10.1021/acs.jproteome.5b00658
  7. Richard J. Fussell, Monica Garcia Lopez, David N. Mortimer, Stuart Wright, Monika Sehnalova, Chris J. Sinclair, Alwyn Fernandes and Matthew Sharman (2014) “Investigation into the Occurerence in Food of Veterinary Medicines, Pharmaceuticals and Chemicals used in Personal Care Products” J. Agric. Food Chem. 62, 3651-59, doi: 10.1021/jf4052418

Dr Paul Whitehead 

After a BA in Chemistry at Oxford University, Paul focused his career on industrial applications of chemistry. He was awarded a PhD at Imperial College, London for developing a microwave-induced-plasma detector for gas chromatography. He spent the first half of his career managing the analytical support team at the Johnson Matthey Research/Technology Centre,specialising in the determination of precious metals and characterising applications such as car-exhaust catalysts and fuel cells. Subsequently, as Laboratory Manager in R&D for ELGA LabWater, he has been involved in introducing and developing the latest water purification technologies. He now acts as a consultant for ELGA.

  • Sales Enquiry
  • Consigue una cotización
  • Technical Support
  • Encuentre un socio aprobado

Sales Enquiry

At ELGA LabWater, we have exciting offers and news about our products and services that we hope you’d like to hear about. We will use your information to predict what you might be interested in. We will treat your data with respect and you can find the details in our Privacy Policy.

ELGA LabWater works with a network of Approved Partners. In order to answer your questions or enquiries, we may pass your contact details to an Approved Partner, who may contact you directly. 

I'd like to receive updates from ELGA LabWater & ELGA Approved Partners based on my details.

Consigue una cotización

At ELGA LabWater, we have exciting offers and news about our products and services that we hope you’d like to hear about. We will use your information to predict what you might be interested in. We will treat your data with respect and you can find the details in our Privacy Policy.

ELGA LabWater works with a network of Approved Partners. In order to answer your questions or enquiries, we may pass your contact details to an Approved Partner, who may contact you directly. 

I'd like to receive updates from ELGA LabWater & ELGA Approved Partners based on my details.

Technical Support

At ELGA LabWater, we have exciting offers and news about our products and services that we hope you’d like to hear about. We will use your information to predict what you might be interested in. We will treat your data with respect and you can find the details in our Privacy Policy.

ELGA LabWater works with a network of Approved Partners. In order to answer your questions or enquiries, we may pass your contact details to an Approved Partner, who may contact you directly. 

Call us

Can't find what you are looking for?

Support Number
+44 (0)20 3567 7300
United Kingdom Sales
+44 (0)1628 879 704
United States of America Sales
+1 877-315-3542
France Sales
+33 1 40 83 65 00
China Sales
+86 400-616-8882

 

Sede central de ELGA LabWater

Lane End Business Park
Lane End, High Wycombe
HP14 3BY
Reino Unido
Tel.: +44 (0) 203 567 7300
F: +44 (0) 203 567 7205

Casos prácticos

  • Abbott Diagnostics
  • Diagnóstico médico de DASA
  • Instituto Médico NeoDIN
  • Fundación del NHS de North Staffordshire
  • Escuela técnica de Olsberg

Recursos

  • Obtenga más información sobre el agua ultrapura
  • Manuales e informes técnicos
  • Tecnologías de purificación
  • Aplicaciones
  • Impurezas en el agua
  • Latest Blog
  • Water Purity - Different Types of Pure Water
  • What is Clinical Laboratory Reagent Water (CLSI)?
  • What is Total Organic Carbon (TOC)?

© VWS (UK) Ltd. comercializado como ELGA LabWater.2025-Todos los derechos reservados.
ELGA es la marca mundial de agua de laboratorio de Veolia.

  • Política de privacidad
  • Términos y condiciones
  • Cumplimiento legal internacional
  • Patentes
  • Trademarks
  • Aviso legal
  • Idioma
    • Deutsch
    • English
    • Español
    • Français
    • Italiano
    • Português
    • 日本語
    • 中文
  • Otros sitios de Veolia
    • Veolia
    • Veolia Foundation
    • Veolia Water Technologies
Elga Veolia
TOP

© 2017 ELGA Veolia